General Questions

The GreenLife waste recycler does not require ANY additional products such as wood chips, chemicals, or charcoal to be added to the waste. It also consumes NO fresh water and does not discharge any “dirty water” to sanitary. The only discharge from the unit is the “Sterile Biomass” and a few gallons of condensate runoff.

You can expect a 90% reduction in volume. Weight reduction will be determined on the type of waste. Typical volume reduction will be in the 70 to 90 % reduction range.

All organic and compostable materials can go into a SE Food Waste Converter.

The system is designed to absorb the odour during operation. However it may emit a very low order resembling the cooking smell at times effectively manages odour through activated charcoal air filters and a super-heated exhaust.

Materials like Spoons will not damage the machine if not in large numbers. But make sure that your are removing them after the cycle. It is always advised to avoid putting such materials into the machine.

You could spread it on the grounds of your premises, at your residence, or give it to a composting facility as manure or send it to the landfill. Because the end product is 95% dry, another option is to mix with natural soil so that it will get composted if few days time.

Nothing need to be added to the system for processing the food waste. If you are depositing high volume of Oily waste, it is recommended to add a portion of green leafs, Cardboard bits or tissue papers to absorb the oil content.

You are advised to fill only up to the agitator level to attain maximum efficiency. Over loading will prolong the process time and can even damage the inbuilt sensors

For medium wet waste you can expect around 25 to 30 Liters of water per 100 Kgs during a process of 12 hours duration.

No. You are not suppose to open the door during the process. This will delay the process cycle to a longer period. The system is programmed to achieve optimum performance.

Since you are using different types of food waste, It is recommended to carry out a soil analysis to determine what to be added to convert the output suitable for soil application or to be used as fertilizer. We can assist you in carrying out the analysis if needed.

You can use any containers or bins to collect the output from the machine. See that the container fits below the discharge chute.

The units are 3 phase 415 volt. Refer our specification sheets.